The Extract Menu provides commands associated with the extraction of electrical information and netlists from the physical layout, and layout versus schematic checking.
| Extract Menu | |||
| Label | Name | Pop-up | Function |
|---|---|---|---|
| Extraction Ciew | viext | none | Show extraction display |
| Show Paths | paths | none | Highlight conducting paths |
| Show Groups | group | none | Show group numbers |
| Show Nodes | nodes | none | Show node numbers |
| Net Selections | exsel | Path Selection Control | Select groups, nodes, paths |
| Device Selections | dvsel | Show/Select Devices | Select and highlight devices |
| Show Terminals | tshow | none | Show terminals |
| Edit Terminals | tedit | none | Edit terminal names/locations |
| Find Terminals | tfind | sub-window | Locate terminal |
| Source SPICE | sourc | Source SPICE File | Update from SPICE file |
| Source Physical | exset | Source Physical | Update electrical from physical |
| Dump Phys Netlist | pnet | Dump Phys Netlist | Save physical netlist |
| Dump Elec Netlist | enet | Dump Elec Netlist | Save electrical netlist |
| Dump LVS | lvs | Dump LVS | Save physical/electrical comparison |
| Extract RLC | exrlc | RLC Extraction | Extract electrical parameters |
| Misc Config | excfg | Misc. Extraction Settings | Set misc. extraction parameters |
| Edit Tech Params | exedt | Extraction Parameter Editor | Edit extraction parameters |